Unreal volume: 3D hair coloring

Send

3D hair coloring involves the use of one primary color and two or more additional shades of the same color.

Such coloring allows you to give your hair color of versatility and naturalness, because natural hair looks much more alive than dyed, and all this is due to the presence in it of different tones, this can be seen in the photo before and after.

3D coloring implies one and the same color, but its different tones — this is what differs from coloring, which promises the introduction of contrasting colors.

Who is suitable for 3D coloring?

3D coloring suits absolutely everyone, regardless of hair color. Both the blonde and the brown-haired can vary their hair color.

For thin and rare hair, similar coloring will give volume, and colored hair will look vivid, like natural.

Brunettes rarely resort to 3D coloring, because the mighty and velvety black color looks best in an even tone.

Kinds of 3D coloring

Blonds with 3D coloring Glitter with golden tints for warm shades, and cold blondes paint strands with ashy highlights.

Light brown hairDyed with 3D technology just look amazing, it can be seen in the photo, which is refuted by the fact that light brown hair color is “mouse”. Dark and light, warm and cold blond hair will shine with ashy and bronze tints.

Brown hair can saturate their hair multifaceted brown flowers. 3D coloring will allow chestnut hair to shine with bronze, cold and chocolate colors to show all its reddish or grayish depth.

Redheaded girls just have to make such a coloration, because rich copper shades look very natural with 3D coloration and a suitable face color pattern. Dark and strawberry redheads - all of them will start playing with volume and highlight.

Black hair You can only saturate the highlights. Separate soft strands will be painted in a graphite shade of black, which will give the hair a steel shine.

In the photo below you can see incredibly beautiful results of 3D dyeing on different hair colors.

3D Hair Coloring Technique

Colorists seek to find a way to create the most natural hair color. The flamboyage was replaced by a 3D coloring technique. Its feature is that only one color is used in 3 shades (maximum 5). And the color is selected close to natural, as the technique does not involve bleaching hair. Any natural hair is not the same color over the entire length. Strands differ from each other in the distribution of pigment in length, in intensity of color, which gives the hair a unique color and volume, which is almost impossible to achieve with dyeing.

The 3D technique allows you to get closer to the same unevenness of the color distribution, which happens in natural hair due to a special technique of applying the dye. The technology requires a very high skill from the hairdresser, otherwise the hair will look unnatural, too colorful and even sloppy.

3D technology benefits

The most important advantage of such coloring is an excellent aesthetic result: the hair looks natural, shimmers with different lighting complex transitions. 3D coloring adds extra volume to the hair, which does not hurt any hairstyle. Another important advantage is the safety of coloring for the hair, as the hair is painted in a shade that is close to natural, there is no harmful effect on them, there is no destructive bleaching that would damage the hair. In addition, such staining is very convenient and economical, there will be no difficulties with regrown roots and will not require frequent correction.

3D coloring scheme

Coloring involves the use of special holographic dyes of one primary color and two auxiliary ones. At the first stage, the master prepares the palette, since the coloring goes simultaneously with all the colors.

After that, the master proceeds to the application of the coloring solution. First, the primary color is processed root part of the hair on the back of the head. Then in a circle from the head to the edges the hair is colored with individual strands of a lighter shade. The last part of the staining is the parietal zone. Further, all zones: occipital, temporal, parietal, are processed by alternating strands of dark and light additional shade.

Each time the scheme is applied by the master creatively, because only he sees the final result and knows in what order to apply pigment to the hair.

3D coloring on dark hair

The peculiarity of 3D coloring is that it is more suitable for owners of dark hair, although blondes with red ladies can also enjoy this method. Dark hair has more shades, which allows you to get a more visible result. Coloring dark hair using 3D technique allows creating depth and color transition. For owners of blue-black hair, such coloring is hardly suitable, as the color nuances are difficult to achieve in this case. And owners of chocolate or dark nut may well appreciate the beauty of this technique. After all, the palette of shades for coloring dark hair is very large.

3D technology on blonde hair

For blondes harder to achieve a natural play with the 3D technique. In their case, the value of the master qualification increases significantly. After all, it is so easy to overdo a little with the dye and the hair will look flat and lifeless. An experienced master will be able to give blond hair an extra volume and a unique game of sun glare with different lighting.

Advantages of the new painting method

It is easy to guess that natural blonde hair is completely different from the hair of girls dyed in blondes. The usual coloring gives only a monochromatic shade, after such coloring of the hair the natural color transitions disappear, a bad uniformity effect is created.

3D coloring on blond hair: before and after

3d hair dyeing is performed by qualified specialists who have undergone comprehensive training and confirmed their ability to work according to this method. Such masters can foresee exact results of work, qualitatively determine the most appropriate strands and colors of coloring agents. By entrusting your hair to incompetent people, you are likely to end up with a rainbow instead of a voluminous hairstyle. It is possible to use 3d coloring both for brunettes, and for blondes, there is no essential difference.

How does the hair coloring process

Innovative technology of coloring suggests some features in the way of coloring. It should be noted that 3D coloring is based on one key color and one or more complementary colors. It is necessary to clarify that 3d hair coloring has a significant difference with coloring. In the first case, the shades do not go beyond the limits of the main hair color. All modulations are very soft, creating a natural color effect. This technology is able to create a sense of volumetric color, make the depth of hair.

The coloring technology itself also has some differences from the standard coloring technique. As shown in the photo, first of all the occipital region and the areas around the root are subjected to staining. After that several strands are covered with paint.

3D coloring brown-haired: before and after

Technology 3D coloring hair is performed in several stages:

occiput area covered by base color
after that, from the back of the head, strands of light color are painted out,
dark and light tones alternate below the back of the head,
the temporal areas of the scalp are painted the same way, but only in the base color,
dark areas of the hair are covered with coloring materials using the same technology.

These steps, shown in the photo, serve only as a basis for actions that do not exclude the possibility of improvisation and an individual approach. One should only pay attention to the length of the hair and the number of additional tones.

Japanese method of 3D staining

The Recroma dye has a cationic liquid crystal base. Such a formula is capable of making the enveloping effect of the chemical component of the coloring agent. Due to this, Recroma dyeing chemical elements penetrate much more deeply into the structural basis of hairs, as if interweaving into it. After such staining color shades become quite persistent. The Japanese cosmetological invention of “wrapping” an irritant ingredient reduces ink contact with the skin of the head to a minimum. Coloring products Recroma do not have specific odors, which also helps to reduce the irritant effect.

Recroma line, Japanese technique of 3D dyeing

Even after two weeks or a whole month, Recroma paint will not give sharp distinctions in color when re-painting. A similar effect can be seen in the photo. The fact is that the Japanese agent has in its composition oxides no more than 6%. Consequently, the structural damage to the hairs is reduced to almost zero even in the case of discoloration.

Dye Recroma effectively achieves full lightening of hair up to five levels. The research center engaged in the production of Recroma products, produces dyes that can be perfectly combined with specific color shades and qualitatively reconstruct the impaired structure of hair. This happens due to the cation component of each Recroma product. It is through this innovation of Japanese technologists that 3d coloring is becoming a more popular innovation. Numerous photos comparing the results before and after dyeing once again show that this hair dyeing technique wins the hearts of young women.

Who would suit this method of coloring: blondes or brunettes?

This technology is suitable for girls of any color type except for owners of black hair.

3D hair coloring for blondes avoids the yellowness that beauties often face with light curls. In addition, different shades make the color richer. Without such iridescent hair looks like an artificial wig.

Blond hair, this technique allows you to get away from the mouse image and add shine and complexity to the hairstyle. Such a neutral color is the best base on which you can play in tones and give a different shade to your curls.

Brown hair 3d hair dye gives additional color saturation. Both copper and chocolate strands look equally beautiful.

Fire hairstyle always looks spectacular. But owners of this color often complain about excessive fluffiness. The technique of volume staining will add visual smoothness and accuracy. Strands shine even brighter and more interesting.

3D coloring on dark hair gives a huge scope for fantasy. In addition, brunettes most difficult to care for the grown roots. Black curls grow back and catch the eye. 3D technology simplifies color care.

3d hair coloring - why you should try

Volumetric hair coloring 3d (d) offers a huge color palette and numerous rich shades. Such tools make hair color overflow natural, harmonious and smooth. With this technique of playing colors, curls will not look bright or detached.

It turns out that this color can choose any girl. But, there is one nuance. The color palette for dark hair has an extended character. But, ladies with blond hair, do not fall into despair, hair coloring 3d (d) will also give your locks a natural and brilliant look, in the case of a properly selected palette of shades.
Do not confuse volumetric hair coloring with coloring technique. In the second type of procedure, the master is free to move in any direction and combine any colors. Hair coloring 3d (d) uses only one color palette and works only with those shades that are included in it.

Thanks to the well-chosen color palette and variations of the incoming shades, the professional easily gets a multi-faceted and natural effect. As is clear from the article, naturalness is the main goal of any procedure.

The advantages of 3d staining

Procedure 3d (d) staining is safe and environmentally friendly. Does not spoil the hair structure and health. Also, constant correction is not required, as the hair is well processed with step-by-step technique. Selected color looks bright, lively and natural, so the grown roots will not be evident at all.
It is worth noting that the procedures for highlighting, bleaching and other ordinary methods harm the strands. Hair dyeing 3d (d) was invented from a humane attitude to the strands, and involves the choice of natural and natural shades.
The answer to the title of the article has been received, then it is worth understanding the very technology of hair dye 3d (d).

3d coloring features

There are several technologies of this procedure. The head is divided into certain zones, after which the individual bands are colored in different shades of the same color and color segments are superimposed on layers. For example, it may be the color of bitter or milk chocolate with a combination of champagne.

3d coloring can be used by girls with almost all hair colors, be they blondes, brunettes or brown-haired women. The three-dimensional effect is obtained by holographic dyes and a special coloring scheme. Irregularly colored strands are able to create glare with artificial light, unusually shimmer with sunlight. Also, holographic dyes restore the hair structure, reviving them and giving them naturalness.

5 advantages of 3D coloring that will conquer you

How often after staining are you satisfied with the result? How natural is the new color? Many girls with sadness admit that the hair after using the paint does not look impressive enough.

Hair, painted in 3d style, beautifully shimmer in the sun

However, in 2010, a new technology of 3D hair dyeing appeared, which revolutionized the art of hairdressing.

Let's discuss the advantages of this method and whether it is possible to achieve a natural shade with it.

3D coloring scheme: performance technique

Color schemes are selected depending on the effect that the client expects to receive after the session. We give a sequence of actions, which most often resorted professional masters.

This way hairdressers change at their own discretion:

The procedure begins with the neck. Visually highlight the triangle on the back of the head and apply the base color on the hair inside this triangle.
Separate the strands of 1.5-2 cm and paint them into a lighter shade, compared to the main one, on the sides of the represented figure.
Take the next strand and paint it two or one and a half tones lighter than the base paint.
Make a new curl darker than the main shade, the next after it is even a little bit darker.
After processing the head, visually divide the surface of the head into areas: the top of the head, temporal and parietal zone.
Paint them in the same way as the back of your head.

3d coloring scheme is not simple, but the effect on the hair will be original

As you can see, the technique requires sufficient skill and practice, therefore, to achieve a quality result in the home, most likely, will not work.

Tip! Choose a hairdresser who already has in his portfolio of work with this method of coloring.

Let's sum up: price and quality

3D coloring - creative hair coloring, which made it possible to get a volumetric color, not inferior to natural. The technique has five main advantages, in view of which it is increasingly being chosen instead of the usual coloring. 3D coloring is suitable for any type of hair except charcoal black.

The scheme of the technique is quite complicated, so you should not experiment with it at home Seek the help of a qualified wizard.

What is 3D coloring?

Let's look at what 3D hair painting is and what is it? Under the staining of strands in 3D technology, it is necessary to understand an absolutely new method, in which several tones are applied to the hair. One of them - the main, it is called the base. The remaining 2-3 tones are required to be in the same color segment, but be a little bit lighter. Proper selection of shades - the most important feature of 3D.

3D coloring - advantages and disadvantages

This technique has a lot of significant advantages:

Increases volume, gives color depth,
Does not harm the health of hair - 3d dyes contain 85% of natural ingredients,
Makes hairstyle more attractive and well-groomed, natural and shiny,
Refreshes the complexion
3D technology is suitable for absolutely everyone - and blondes, and brown-haired women, and redheads, and brunettes. But on dark hair, it looks spectacular,
In the strands are glare, which give the dynamics of the hair and allow them to play under the sun,
Allows you to mark the individual parts of the hairstyle or select the strands in the frame of the face,
Creates a visual lamination effect,
Can be safely performed on weakened hair,
For painting, a holographic dye with a regenerating effect is used, which allows the hair to be mobile and lively,
When the roots grow, the color will be as bright, because the adjustment can be done only once a month.

As for the shortcomings, there will not be too many of them:

This technique is only possible for experienced craftsmen, because painting strands in 3D is not an easy task,
Colored hair - extra care. If you run the strands, the result will be disastrous,
Wrong selection of shades will negatively affect the final result,
Refreshing the roots and the color will also be very difficult - this is what explains the rather large price of the procedure,
3d painting is extremely difficult to perform at home.

Before and after dyeing:

For fair hair

This technology will make any artificial color natural, which is very important for blondes, neatly painted in a uniform tone. To make this hairstyle look alive, play a new light, you need to add a golden or sand color scheme.

Hair will be equally beautiful overflow if it is diluted with a warm wheat or cold, ashy shade. Owners of a golden blond can afford honey, amber tones. With their help, even get to look younger.

You will find more beautiful and sophisticated blond hair dyeing ideas on our website.

By the way. Light ones look thicker and more voluminous than dark ones. Therefore, such a three-dimensional coloring is suitable for girls with short haircuts.

Volumetric hair coloring 3d - technology performance

Let's see what way you can get all of the above effects. The technology is broken down into step-by-step actions.

1. Color selection. To begin with, the master selects the most appropriate color.

2. Shade selection. From the provided primary color palette, one main shade and several additional ones are selected. As a rule, they are 1 -2 tones lighter than the main one.
Additional shades have been selected for several strands. With the help of their processing, the overall look of the picture will be complemented by beautiful and natural hair shimmer. For a visual demonstration, you can refer to the photo "before and after" and consider all the advantages of this technology. But remember, no picture can fully convey the living colors and color play.

The roots, with the 3d coloring system, lend themselves to a darker shade, because it is this condition that will allow the color-modified curls to look natural and concise.

For dark hair

On brown-haired 3D coloring looks most impressive. After all, it is on brown hair shining highlights especially noticeable. Chocolate tones are optimal for creating contrast. With them strands will seem more magnificent. Luxurious image will create a nutty shades. Depending on the natural color, the palette is very extensive: from the color of baked milk to the deep color of dark chocolate.

It is believed that only burning brunettes need to avoid fashionable volumetric coloring. However, with a skillful selection of shades, black hair can also shine in a new way. Just in this case, the optimal choice will be 7d, because according to the rules of technology, you can select strands in different colors.

Attention! For the holographic dyeing of blond hair, 2 well-chosen shades will work best, for dark ones - from 3 to 7.

Price in the cabin and at home

As in the case of any other procedure, the cost of services of a professional hairdresser will be more expensive than an independent experiment. Approximate price of 3D coloring - from 1500 to 2500 rubles. This indicator is influenced by the length of the hair, the complexity of the work. 7 d will cost an average of 2,500 from 5,000 rubles.

At home, the high cost of the procedure is determined by the cost of paint and the number of shades used. Ammonia-free formulations can be purchased at a price of 400 rubles. Plus, about 100 rubles will need to pay for the oxidizer. Coloring brush, measuring cup and other materials necessary for the process will complement the list of expenses for three-dimensional painting.

What is needed for the procedure and how to perform it?

If you still decide to carry out the procedure at home, be sure to prepare such materials:

Holographic paint 3-4 shades (basic and optional). Means take one brand! Some masters use ordinary paint - the effect is also not bad,
Protective apron,
Gloves
Special foil cut into strips,
Non-metallic mixing bowls,
Several brushes (for each paint color) 2-3 cm wide,
Plastic clips - will be needed to divide the hair into zones,
Measuring cup to measure the right amount of paint.

The 3D dyeing procedure can be performed in two ways. Consider each one of them.

First, you need to divide the hair into zones. For convenience, use the clips.
At the back of the head, separate the triangle with the apex pointing towards the neck. Paint it in the main or base color.
Separate one strand from each side of this triangle (1.5-2 cm in width). Paint them in an additional tone (a tone lighter than the main one).
Slightly lower separate one more strand. Apply paint to them that will be lighter than the previous color by half tone or tone.
For the next pair of strands, take a shade from the third step (a tone lighter than the main one).
Now comes the main color.
Repeat step 3-5.
Reapply base color, moving to the bottom of the nape.
Lower the occipital part (5-7 cm from the neck) paint over the same pattern, alternating the main color with the additional ones.
Separate the temporal zones. Take one strand on top and lubricate it with the main color. Apply additional shades and return to the main. Spinning around the face paint over the base shade!
Treat the parietal area in exactly the same way. Do not forget to separate the individual strands of hair with strips of foil, so as not to mix tones.
Having sustained 20-40 minutes (time depends on the initial hair color), wash your hair with water without using shampoo.

Attention! If you want to make a haircut or trim the ends, do it before the procedure. The master needs to take into account the layering and length of hair. Dye should be applied only on dry strands laid in a hair.

3D staining of the strands can also be performed according to the principle of diversified highlighting, in which paint is applied to each strand of a different shade. Then they paint over the hair with the main dye. Of course, in this case there is no need to talk about a full-fledged 3D effect. This method will enhance the brilliance and allow you to beat the main color of the hair.

What materials will be needed

You will need:

Hair color of 3-4 colors, one of which will be dominant, the rest - additional, a little lighter than the main one. Buy quality compounds, necessarily from the same manufacturer. Then the shades will not be very different from each other and will create a beautiful visual volume and shine effect. All tones must be from the same color segment, otherwise the result will resemble highlighting or coloring. Well proven paint that shimmers in the light: L'Oreal Professionnel Luo Color or Million Color from Schwarzkopf. True, the cost of these products is quite high (from 400–500 to 900 rubles per pack).
Several plastic, glass or porcelain containers for the preparation of solutions. Metal utensils are not suitable, because they can cause oxidative processes.
Brushes for applying and distributing paint with a width of 2–3 cm. They will need as many shades will use.
Measuring cup for the preparation of components in the right amount.
Foil or polyethylene, from which you need to cut a wide ribbon to distinguish between curls after dyeing.
Clips to split hair into strands.
Gloves to protect hands from chemical compounds - rubber or cellophane.
Waterproof peignoir or cape that will not allow the paint to get on clothes.
Comfortable comb for zoning hair (thin, with a tail).
Towel.

Attention! Before starting the procedure, test the skin with selected paints to ensure that there are no allergic reactions.

Dyeing techniques

Before you start painting hair, you need to develop a scheme. It should take into account the original color of the hair, the type and length of the strands, especially the appearance. The schematic image put the necessary accents, glare.

You can use a universal sketch, which in this case is not the only correct one and has different variations depending on the performer’s imagination:

Start from the back of the head. Coat the triangle with the main color. The angle of the figure should be directed towards the neck.
From each side of the triangular zone, separate parts of hair 1.5–2 centimeters thick. Paint each one with a color that is 1 tone lighter than the base one.
Make the following strands 0.5–1 tones lighter than the previous color.
Next, separate the small parts and apply a shade 1 tone darker (that is, a tone lighter than the base color).
The next two strands cover the main paint.
Then move in the same sequence: lighter by 1 tone than the previous one, then paler by 0.5 tone, then darker by 1 tone and again the base.
Acting on such a scheme, move to the bottom of the head. When a horizontal strip of 5–7 centimeters long remains above the neck, color this zone separately using the same technique. Move up and down, alternating between strands.
Separate the hair from each other with foil or polyethylene tapes so as not to mix colors.
Then select the temporal zone. Pick up the curls above the ear, draw a line from the top line of the neck to the forehead.
Taking one strand from above, cover it with base paint. The following are in this order: the tone is lighter, 0.5 tones paler than the previous one, the tone is darker. Continue alternating in the same sequence. The first strand should be 2 centimeters wide, all the rest should be 1.5 each. Part of the hair of the face should be painted the main shade.
Finish the parietal area. First, color the strand that borders on hair from the back of the head. Acting in the same way, move towards the forehead.

In practice, the implementation of this scheme looks like this:

Put on a protective cape, gloves.
Separate the zones according to the sketch: back of head, temples, parietal part.
Prepare the coloring matter.
Color the strands according to the scheme, not forgetting to wrap hair in shreds of foil or polyethylene.
Soak up the time specified in the instructions for packaging.
Remove the separating strips and wash the head without shampoo.
Apply balm.
Dry and style your hair.

Council It is necessary to begin coloring from roots, consistently moving to tips.

This method is considered time consuming and requires skill and accuracy. For use in the home suitable lightweight method. He gives especially good result on dark hair:

Make highlights a few light shades. You can paint the strands by zigzag or staggered.
Wash off the paint.
Dry your hair with a towel.
Cover the hair with the main tone.
Having sustained the allotted time, rinse and apply balm.
Do the styling.

The pros and cons of staining

Reviews of users and specialists list such advantages of multidimensional hair coloring:

the hair looks like streaked strands are a natural gift, not artificially colored curls,
the volume is visually increasing,
color acquires dynamics, plays interesting highlights,
using this technology, it is possible to emphasize strands in separate zones,
correction can be carried out once a month, updating the roots, especially if the method of coloring was applied on "their" natural hair,
The technique is universal for different types of hair and colors.

Disadvantages of the procedure:

high cost for salon painting,
the complexity of execution at home,
correction is also desirable to entrust a professional stylist,
the duration of staining - from 2 to 4 hours. Depends on the length of hair, the number of shades used,
in the absence of proper care, the hairstyle looks dirty, dull,
incorrectly chosen colors will not create the desired effect,
Not all hairdressing salons offer the service of volumetric dyeing, since it is considered quite new.

Stylish hairstyle with the optical illusion of holography has many fans around the world. No wonder her supporters are many movie stars, show business, fashion show participants of the best haute couture collections.

3D and 7D staining looks very impressive not only in reality, but also in the lens of cameras and camcorders. This technique can be very helpful if you are going to a photo shoot. Voluminous, shining hair is the best decoration for any girl. But if you are unsure that you can handle the coloring technique yourself, entrust your curls to a professional craftsman.

Expert advice on hair coloring will help you achieve the desired effect:

3d coloring scheme

The scheme has a standard and established look. Therefore, when coloring should strictly follow it.

1. First, the occipital part is stained, starting from the triangular area (see figure). As mentioned above, the wizard selects several shades. So, in this case, the main one will be used. Next, we take from its foundations strands, 1.5 - 2 cm thick, painting it in light, selected shades.

2. The master, picking up to the lower occipital zone, paints in sequence:
• Hue is lighter in tone,
• The shade is lighter on the floor tone,
• Hue is darker on the floor tone,
Accordingly, these three shades were chosen based on the main (primary) color. The zones shown in figure 2, 1, and 3 are painted on the same principle.

3. This sequence lasts up to the temporal zone (see number 5 in the figure). Here we stop and pay attention to the strand, which is near the face. These 2 cm of hair are colored exactly in the main shade.Then we catch strands of 1.5 cm and paint in the same way as the back of the head.

4. The parietal part goes into operation in the last stage (number 4 in the figure). She painted over a similar sequence of colors.

7d hair coloring

3D hair coloring is a fairly new technology that has appeared in hairdressing. But, the world of beauty is constantly in motion, presenting new and new procedures. Hair dyeing 7d has become a strong competitor of 3D technology. What is new?
And the fact that the color occurs in the horizontal direction of hair growth. The technique uses a large palette, so it has a greater range of movement. She looks bright and natural. For a visual comparison of the two technologies, you can see various photos showing the result. That is, the 3d coloring uses one color and several shades, and the 7d procedure produces hair painting with different colors.

To the question: why it is worth trying this procedure, a detailed answer was provided.

3d hair coloring - photo

Volumetric hair coloring is gradually gaining momentum and their regular customers. After all, this technology really makes the hair more alive and natural. And in the world of constant stress and unfavorable environmental situation, strands lose all their healthy properties and attractive appearance.

Also, thanks to the article, you already have a little idea of the innovative technology of dyeing. Now, with the exact solution, it is necessary to correctly select an experienced master, who not only has global experience, but can also “feel” color. There are really few, but who are looking for, he will always find!
At home, it is not recommended to carry out coloring on the 3d system. Even the described scheme may not have the desired effect. Such a case should always be in the hands of professionals.

Features 3d staining

The highlight of the technology is the use of not one, but several colors, or rather, shades of the same color, almost indistinguishable from each other. Strands are painted in a special sequence, and due to a smooth color transition, the hairstyle acquires volume and looks as natural as possible.

It is worth noting that 3d coloring is suitable for dark and light hair, however, the technique of applying paint is quite complex and requires special skills from a hairdresser. Properly colored locks seem to shine from the inside and look healthy.

In contrast to coloring, lightening and highlighting, as a result of which hair was damaged and looked lifeless, coloring with a 3d effect involves the use of oxidizers not more than 6% versus traditional 9 - 12%. This is a special dye ionic basis. Positively charged particles contain pigment and reflective particles, due to which the strands shimmer and change shade depending on the light. It would not be superfluous to say that dyes of this type have a positive effect on the structure of the hair.

Technology 3d hair dye

As such, there is no single rule for holographic coloring - each master himself creates his own scheme by acting with a brush, like an artist. For a visual example, consider the sequence of 3d dyeing blond hair using the “Lumina” technique.

So, you need to paint different colors: the main (A, as close as possible to the natural) and additional (B, C, D, E).

The application technique is as follows:

Along the parting, a triangle of hair is distinguished, and its splits.
From the ear to the ear, the hair is divided by a horizontal parting, pinned with clamps on both sides.
Starting from the back section begins staining in tone A, moving from the roots to the tips.
Tone A is applied to the root of the hair, moving from the crown to the temples.
Tone B is applied to the back of the head and spread over the entire length of the hair and the tips, making a smooth transition at the roots so that there is no contrast with tone A.
The middle part and the tips of the remaining strands are stained, alternating the tones B, C and D.
The front triangle of the hair is stained, alternating the tones of E and A.

Remember, to look irresistible, do not need to resort to the help of modern plastic surgery. It is enough just to correct your image and style a little and not lose confidence in yourself.

Send